Cover Image

Mechanosynthesis of pentiptycene-based polyesters and polycarbonates

Wahab A.K. Al-Ithawi, Eman S. A. Al-Sammarraie, Artem V. Baklykov, Vadim A. Platonov, Aqeel M.K. Altobee, Nikita S. Glebov, Albert F. Khasanov, Igor S. Kovalev, Igor L. Nikonov, Dmitry S. Kopchuk, Grigory V. Zyryanov

Abstract


Iptycenes are common building blocks for the small-molecules or polymer-based chemosensors and fluorophores. In addition, iptycene derivatives are widely presented in polymers of intrinsic microporosity (PIMs) as materials for the separation and purification technologies. In this manuscript we wish to report a mechanochemical approach to pentiptycene-based polyesters and polycarbonates as, possibly, new representatives of PIMs. Our approach involves the polycondensation reaction between 5,7,12,14-tetrahydro-5,14:7,12-bis([1,2]benzeno)pentacene-6,13-diol (pentiptycene-6,13-diol) and triphosgene or oxalyl chloride under ball-milling conditions. The obtained polymers were characterized by means of 1H NMR- and IR-spectroscopy. As the last step, the fluorescence “turn-off” response of pentiptycene-6,13-diol and two pentiptycene-based polymers towards nitroanalytes (2,4-dinitrotioluene (DNT) and 2,4,6-trinitrophenole (picric acid, PA)) was investigated, and Stern-Volmer constants as high as 1o4 M–1 were observed.

 


Keywords


pentiptycene, mechanosynthesis, polyester, polycarbonate, porous polymers

Full Text:

PDF

References


McKeown NB. Polymers of intrinsic microporosity (PIMs). Polymer. 2020;202:122736. doi:10.1016/j.polymer.2020.122736

McKeown NB. Polymers of intrinsic microporosity. ISRN. 2012;2012:1-16. doi:10.5402/2012/513986

Budd PM, Ghanem BS, Makhseed S, McKeown NB, Msayib KJ, Tattershall CE. Polymers of Intrinsic Microporosity (PIMs): Robust, Solution-Processable, Organic Nanoporous Materials. Chem Commun. 2004;2:230–231. doi:10.1039/b311764b

Low ZX, Budd PM, McKeown NB, Patterson DA. Gas Permeation Properties, Physical Aging, and Its Mitigation in High Free Volume Glassy Polymers. Chem Rev. 2018;118(12):5871–5911. doi:10.1021/acs.chemrev.7b00629

Ghanem BS, McKeown NB, Budd PM, Al-Harbi NM, Fritsch D, Heinrich K, Yampolskii Y. Synthesis, characterization, and gas permeation properties of a novel group of polymers with intrinsic microporosity: PIM-polyimides. Macromolecules. 2009;42(20):7881-7888. doi:10.1021/ma901430q

Rogan Y, Starannikova L, Ryzhikh V, Yampolskii Y, Bernardo P, Bazzarelli F, McKeown NB. Synthesis and gas permeation properties of novel spirobisindane-based polyimides of intrinsic microporosity. Polymer Chem. 2013;4(13):3813–3820. doi:10.1039/C3PY00451A

Ma X, Swaidan R, Belmabkhout Y, Zhu Y, Litwiller E, Jouiad M, Han Y. Synthesis and gas transport properties of hydroxyl-functionalized polyimides with intrinsic microporosity. Macromolecules. 2012;45(9):3841–3849. doi:10.1021/ma300549m

Carta M, Malpass-Evans R, Croad M, Rogan Y, Jansen JC, Bernardo P, McKeown NB. An efficient polymer molecular sieve for membrane gas separations. Sci. 2013;339(6117):303–307. doi:10.1126/science.1228032

Ma X, Ghanem B, Salines O, Litwiller E, Pinnau I. Synthesis and effect of physical aging on gas transport properties of a microporous polyimide derived from a novel spirobifluorene-based dianhydride. ACS Macro Lett. 2015;4(2):231–235. doi:10.1021/acsmacrolett.5b00009

Ma X, Salinas O, Litwiller E, Pinnau I. Novel spirobifluorene-and dibromospirobifluorene-based polyimides of intrinsic microporosity for gas separation applications. Macromolecules. 2013;46(24):9618–9624. doi:10.1021/ma402033z

Wang Z, Wang D, Zhang F, Jin J. Troger’s base-based microporous polyimide membranes for high-performance gas separation. ACS Macro Lett. 2014;3(7):597–601. doi:10.1021/mz500184z

Zhuang Y, Seong JG, Do YS, Jo HJ, Cui Z, Lee J, Guiver MD. Intrinsically microporous soluble polyimides incorporating Tröger’s base for membrane gas separation. Macromolecules. 2014;47(10):3254–3262. doi:10.1021/ma5007073

Swaidan R, Al-Saeedi M, Ghanem B, Litwiller E, Pinnau I. Rational design of intrinsically ultramicroporous polyimides containing bridgehead-substituted triptycene for highly selective and permeable gas separation membranes. Macromolecules. 2014;47(15):5104–5114. doi:10.1021/ma5009226

Ghanem BS, Swaidan R, Litwiller E, Pinnau I. Ultra‐microporous triptycene‐based polyimide membranes for high‐performance gas separation. Adv Mater. 2014;26(22):3688–3692. doi:10.1002/adma.201306229

Swager TM. Iptycenes in the design of high performance polymers. Acc Chem Res. 2008;41(9):1181–1189. doi:10.1021/ar800107v

Luo S, Liu Q, Zhang B, Wiegand JR, Freeman BD, Guo R. Pentiptycene-based polyimides with hierarchically controlled molecular cavity architecture for efficient membrane gas separation. J Membr Sci. 2015;480:20–30. doi:10.1016/j.memsci.2015.01.043

Nozari M, Kaur M, Jasinski JP, Addison AW, Arabi Shamsabadi A, Soroush M. 5, 7, 12, 14-Tetrahydro-5, 14: 7, 12-bis ([1, 2] benzeno) pentacene-6, 13-diol dimethylformamide disolvate. IUCrData. 2016;1(7):x161130. doi:10.1107/S2414314616011305

Shamsabadi AA, Seidi F, Nozari M, Soroush M. A new pentiptycene‐based dianhydride and its high‐free‐volume polymer for carbon dioxide removal. ChemSusChem. 2018;11(2):472–482. doi:10.1002/cssc.201701491

Corrado TJ, Huang Z, Huang D, Wamble N, Luo T, Guo R. Pentiptycene-based ladder polymers with configurational free volume for enhanced gas separation performance and physical aging resistance. PNAS. 2021;118(37):e2022204118. doi:10.1073/pnas.2022204118

Tan L, Tan B. Hypercrosslinked porous polymer materials: Design, synthesis, and applications. Chem Soc Rev. 2017;46(11):3322–3356. doi:10.1039/C6CS00851H

Al-Ithawi WKA, Khasanov AF, Valieva MI, Baklykov AV, Chistiakov KA, Ladin ED, Kovalev IS, Nikonov IN, Kim GA, Vadim AP, Kopchuk DS, Wang Z, Zyryanov GV. (Mechano)synthesis of azomethine-and terpyridine-linked diketopyrrolopyrrole-based polymers. Chimica Techno Acta. 2023;10(2):202310204. doi:10.15826/chimtech.2023.10.2.04

Al-Sammarraie ESA, Al-Ithawi WAK, Baklykov AV, Platonov VA, Altobee AMK, Glebov NS, Khasanov AF, Kovalev IS, Nikonov IL, Kopchuk DS, Sapozhnikova IM, Sabirova TM, Jin Y, Zyryanov GV, Rusinov VL. (Mechano)chemical modification of polyvinyl chloride with azole-based drugs. Chimica Techno Acta. 2024;11(2):202411211. doi:10.15826/chimtech.2024.11.2.11

Zhu XZ, Chen CF. Iptycene quinones: Synthesis and structure. J Org Chem. 2005;70(3):917–924. doi:10.1021/jo0483015

Cao J, Lu HY, Chen CF. Synthesis, structures, and properties of peripheral o-dimethoxy-substituted pentiptycene quinones and their o-quinone derivatives. Tetrahedron. 2009;65(39):8104–8112. doi:10.1016/j.tet.2009.07.090

Wang T, Gao F, Li S, Phillip WA, Guo R. Water and salt transport properties of pentiptycene-containing sulfonated polysulfones for desalination membrane applications. J Memb Sci. 2021;640:119806. doi:10.1016/j.memsci.2021.119806

Luo S, Zhang Q, Zhang Y, Weaver KP, Phillip WA, Guo R. Facile synthesis of a pentiptycene-based highly microporous organic polymer for gas storage and water treatment. ACS Appl Mater Interfaces. 2018;10(17):15174–15182. doi:10.1021/acsami.8b02566

Al-Ithawi WK, Aluru R, Baklykov AV, Khasanov AF, Kovalev, IS, Nikonov IL, Kopchuk DS, Novikov AS, Santra S, Zyryanov GV, Ranu, BC. Mechanosynthesis of Polyureas and Studies of Their Responses to Anions. Polymers. 2023;15(20):4160. doi:10.3390/polym15204160

McQuade DT, Hegedus AH, Swager TM. Signal Amplification of a “Turn-On” Sensor: Harvesting the Light Captured by a Conjugated Polymer. J Am Chem Soc. 2000;122(49):12389–12390. doi:10.1021/ja003255l




DOI: https://doi.org/10.15826/chimtech.2024.11.3.06

Copyright (c) 2024 Wahab A.K.Al-Ithawi, Eman S.A. Al-Sammarraie, Artem V. Baklykov, Vadim A. Platonov, Aqeel M.K. Altobee, Nikita S. Glebov, Albert F. Khasanov, Igor S. Kovalev, Igor I. Nikonov, Dmitry S. Kopchuk, Grigory V. Zyryanov

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Scopus logo WorldCat logo DOAJ logo CAS logo BASE logo eLibrary logo

© Website Chimica Techno Acta, 2014–2024
ISSN 2411-1414 (Online)
This journal is licensed under a Creative Commons Attribution 4.0 International