Email this article 
Development of technology for obtaining electrodes based on copper wire using in the manufacture of solar modules
Abstract
To optimize the technological process of manufacturing copper wire coated with solder of the POIN-52 grade, the optimal modes for the tinning temperature, linear velocity, diameter of the diamond die and flux were identified. It was found that the best wire tinning process is achieved when cleaning the surface of a copper wire by the method of electrochemical degreasing. The results of the tests showed that, in terms of mechanical and electrical parameters wire meets the require-ments for electrodes in the manufacture of solar modules. The results of climatic tests of solar modules showed a high degree of reliability with a power loss of 0.86% and thermal cycling tests with a power loss of 0.4%, which is within tolerance.
Keywords
Full Text:
PDFReferences
Maronchuk II, Sanikovich DD, Mironchuk VI. Solnechnye elementy: sovremennoe sostoyanie i perspektivy razvitiya. Energetika [Solar cells: current state and development prospects. Energy] Izvestiya vysshih uchebnyh zavedenij i energeticheskih ob"edinenij SNG. 2019;62(2):105–123. Russian. doi:10.21122/1029-7448-2019-62-2-105-123
Prospects for Energy Technologies 2008. Scenarios and Strategies until 2050 [Internet]. International Energy Agency. OECD / IEA, 2008. p. 10–15 [cited 29.07.2021]. Available from: https://iea.blob.core.windows.net/assets/0e190efbdaec-4116-9ff7-ea097f649a77/etp2008.pdf
Larionov VR, Malevskij DA, Pokrovskij PV et al. Izmeritel'nyj kompleks dlya izucheniya kaskadnyh solnechnyh fotoelektricheskih elementov i koncentratornyh modulej na ih osnove [Measuring complex for the study of cascade solar photovoltaic cells and concentrator modules based on them] Tekh Fiz. 2015;60:891–896. Russian. doi:10.1134/S1063784215060158
Semenov VL, Aleksandrov, RI, Kuzmin MV, Rogozhina LG, Ivanova KY, Patianova AO, inventors; Chuvash State University named after I. N. Ulyanov, assignee. Method for producing copper wire coated on the basis of an alloy of tin-indium. Russian Federation patent RU 2764277 C1. 2022. Russian.
Vinokurov EG, Margolin LN, Farafonov VV. Elektroosazhdenie kompozitsionnykh pokrytiy [Electrodeposition of composite coatings]. Izvestiya vysshikh uchebnykh zavedeniy. Seriya: Khimiya i khimicheskaya tekhnologiya. 2020;63(8):4–38. Rus-sian.
Ivanova KYu et al. Synthesis and research of polyfunctional silylureas used in electric deposition of tin-indium alloy. Chim Techno Acta. 2021;8(3):20210305. doi:10.15826/chimtech.2021.8.3.05
Socolowski N. Lead free alloys and limitations for surface mount . Proc Surf Mount Int. 1995;477–480. doi:10.1134/S0031918X09090105
Csincse J, Janjun S, Uisang Q, Stewart V, Graham A, inventors; Wuxi Suntech Power Co, assignee. A method of producing electrode of solar cell and device for electrochemical deposition. Russian Federation patent RU 2399119 C2. 2010. Russian.
Semenov VL, Aleksandrov, RI, Kuzmin MV, Rogozhina LG, Ivanova KY, Patianova AO, inventors; Chuvash State University named after I. N. Ulyanov, assignee. Flux for soldering and tinning of copper wire. Russian Federation patent RU 2741607 C1. 2021. Russian.
Patianova AO, Ivanova KYu, Rogozhina LG, Kuzmin MV, Semenov VL. Improving the environmental production of electrodes for solar panels. Chim Techno Acta. 2020;7(4):186–191. doi:10.15826/chimtech.2020.7.4.09
DOI: https://doi.org/10.15826/chimtech.2022.9.2.S1
Copyright (c) 2021 M.S. Illarionova, K.Y. Ivanova, M.Vl. Kuzmin, A.O. Patianova, V.L. Semenov
This work is licensed under a Creative Commons Attribution 4.0 International License.
© Website Chimica Techno Acta, 2014–2024
ISSN 2411-1414 (Online)
This journal is licensed under a Creative Commons Attribution 4.0 International