Cover Image

Hierarchical MAPSO-11 molecular sieves synthesized from aluminum isopropoxide: synergistic effect of acidity and mor-phology on the hydroisomerization of n-C16

Artur Malunov, Dmitry Serebrennikov, Roman Yakovenko, Nadezhda Filippova, Svetlana Kostyleva, Andrei Baryshev, Marat Agliullin

Abstract


Bifunctional catalysts based on SAPO-11 molecular sieves exhibit high selectivity in the hydroisomerization of long-chain n-paraffins; however, their widespread application is constrained by moderate acidity and diffusion limitations within the 1D channels. Herein, we propose a strategy to enhance catalyst efficiency through the creation of a hierarchical structure and isomorphous substitution with magnesium (MAPSO-11). It was established that the use of aluminum isopropoxide promotes the formation of a hierarchical porous architecture composed of aggregated nanocrystals. The influence of magnesium on the morphology was elucidated: at an optimal MgO/Al2O3 ratio of 0.1, primary crystals of minimal size (~50 nm) are formed, which ensures a maximized external surface area (SEXT= 93 m2/g) and secondary mesopore volume (Vmeso = 0.19 cm3/g). A further increase in magnesium content leads to crystal growth and a reduction in pore accessibility. TPD-NH3 results confirm that the introduction of Mg significantly enhances the total acidity and the concentration of strong acid sites compared to conventional SAPO-11. Catalytic testing of Pt-containing systems in the hydroisomerization of n-hexadecane demonstrated that the developed mesoporosity and enhanced acidity enable a shift of the temperature window for maximum isomer yield to a lower temperature range (20–30 °C below that of SAPO-11). The obtained results demonstrate an effective approach for tuning the activity of hierarchical molecular sieves through precise control of the magnesium content, opening new avenues for the development of low-temperature catalysts for the production of low-pour-point oils and fuels.

Keywords


MAPSO-11 molecular sieves; hierarchical structure; aluminum isopropoxide; bifunctional catalysts; hydroisomerization of n-C16

Full Text:

PDF

References


Martínez C, Corma A. Inorganic molecular sieves: Prepara-tion, modification and industrial application in catalytic processes. Coordination Chemistry Reviews. 2011;255:1558–80. doi:10.1016/j.ccr.2011.03.014.

Pérez-Botella E, Valencia S, Rey F. Zeolites in Adsorption Processes: State of the Art and Future Prospects. Chem Rev. 2022;122:17647–95. doi:10.1021/acs.chemrev.2c00140.

Potter ME. Down the Microporous Rabbit Hole of Silicoalu-minophosphates: Recent Developments on Synthesis, Char-acterization, and Catalytic Applications. ACS Catal. 2020;10:9758–89. doi:10.1021/acscatal.0c02278.

Hartmann M, Elangovan SP. Catalysis with Microporous Aluminophosphates and Silicoaluminophosphates Contain-ing Transition Metals. Advances in Nanoporous Materials, vol. 1, Elsevier; 2010, p. 237–312. doi:10.1016/S1878-7959(09)00104-2.

Yadav R, Singh AK. Recent Developments on Clean Fuels over SAPO-Type Catalysts. In: Pant KK, Gupta SK, Ahmad E, editors. Catalysis for Clean Energy and Environmental Sus-tainability, Cham: Springer International Publishing; 2021, p. 503–25. doi:10.1007/978-3-030-65021-6_16.

Du Y, Wright PA. Aluminophosphate Zeotypes: Structural Chemistry and Applications. In: Serrano DP, Čejka J, edi-tors. Zeolites, Royal Society of Chemistry; 2025, p. 155–96. doi:10.1039/9781837676859-00155.

Baerlocher C, McCusker LB, Olson DH. Atlas of Zeolite Framework Types. Elsevier. 2007.

Wang Q, Zhang W, Ma X, Liu Y, Zhang L, Zheng J, et al. A highly efficient SAPO-34 catalyst for improving light ole-fins in methanol conversion: Insight into the role of hier-archical porosities and tailoring acid properties based on in situ NH3-poisoning. Fuel. 2023;331:125935. doi:10.1016/j.fuel.2022.125935.

Aljajan Y, Stytsenko V, Rubtsova M, Glotov A. Hydroisomer-ization Catalysts for High-Quality Diesel Fuel Production. Catalysts. 2023;13:1363. doi:10.3390/catal13101363.

Serebrennikov DV, Filippova NA, Fayzullina ZR, Mesch-eryakova ES, Kutepov BI, Sabirov DSh, et al. Hydroisomeri-zation of n-Hexadecane over Pt/SAPO-11 and Pt/SAPO-41 Molecular Sieves Differing in Crystal Morphology and Size. Pet Chem. 2025;65:369–77. doi:10.1134/S096554412560081X.

Miller SJ. New molecular sieve process for lube dewaxing by wax isomerization. Microporous Materials. 1994;2:439–49. doi:10.1016/0927-6513(94)00016-6.

Yu G, Qiu M, Wang T, Ge L, Chen X, Wei W. Optimization of the pore structure and acidity of SAPO-11 for highly effi-cient hydroisomerization on the long-chain alkane. Mi-croporous and Mesoporous Materials. 2021;320:111076. doi:10.1016/j.micromeso.2021.111076.

Yadav R, Sakthivel A. Silicoaluminophosphate molecular sieves as potential catalysts for hydroisomerization of al-kanes and alkenes. Applied Catalysis A: General. 2014;481:143–60. doi:10.1016/j.apcata.2014.05.010.

Torres-Bujalance V, Prieto CA, Rodriguez Espinoza KE, Gon-zález-Mendoza LA. Production of Biofuels from Hydrodeox-ygenation and Hydroisomerization of Triglycerides with Metal-Supported SAPO-11 Molecular Sieves. Energy Fuels 2024;38:4312–4324. doi:10.1021/acs.energyfuels.3c04992.

Tuo C, Liu Q, Wu X, Abulizi A, Ren T, Nulahong A. Prepara-tion and n-hexadecane hydroisomerization properties of SAPO-11-based composite molecular sieve. Res Chem In-termed 2024;50:5491–5523. doi:10.1007/s11164-024-05393-4.

Jang JH, Kim HJ, Kim JH, Lee JE, Jang HS, Kang SH. Evalua-tion of Waste-Plastic Pyrolysis Oil as a Potential Feedstock for Lubricant Base Oil Production via Hydroprocessing. Sus-tainability 2026;18:2655. doi:10.3390/su18052655.

Zheng D, Li L, Yu S. In-situ synthesis of NiMo@SAPO-11 under mild conditions for the hydrodeoxygenation of trio-lein. Molecular Catalysis 2025;579:115076. doi:10.1016/j.mcat.2025.115076.

Li X, Fan Q, Wu K, Liu N, Zhang W, Liu Y, et al. Enhancing catalytic isomerization ability of SAPO-11 by typical acid modification in preparation of green diesel by one-step hy-drotreatment of FAME. Renewable Energy 2024;224:120226. doi:10.1016/j.renene.2024.120226.

Zhang M, Long H, Fan D, Wang L, Wang Q, Chen Y, et al. Synthesis of ZSM-48 zeolites and their catalytic perfor-mance: a review. Catal Sci Technol. 2022;12:5097–109. doi:10.1039/D2CY00267A.

Parfenov MV, Pirutko LV, Yakovlev IV, Lapina OB, Prosvirin IP, Klimov OV, et al. Role of Zeolite Acidity and Ni Content in Hexadecane Hydroisomerization over Ni/ZSM-23 Cata-lyst. Ind Eng Chem Res. 2024;63:5557–72. doi:10.1021/acs.iecr.3c03574.

Bensafi B, Chouat N, Djafri F. The universal zeolite ZSM-5: Structure and synthesis strategies. A review. Coordination Chemistry Reviews. 2023;496:215397. doi:10.1016/j.ccr.2023.215397.

Gianotti E, Manzoli M, Potter ME, Shetti VN, Sun D, Pater-son J, et al. Rationalising the role of solid-acid sites in the design of versatile single-site heterogeneous catalysts for targeted acid-catalysed transformations. Chem Sci. 2014;5:1810–9. doi:10.1039/C3SC53088D.

Elangovan SP, Hartmann M. Evaluation of Pt/MCM-41//MgAPO-n composite catalysts for isomerization and hy-drocracking of n-decane. Journal of Catalysis. 2003;217:388–95. doi:10.1016/S0021-9517(03)00042-3.

Yang X, Xu Z, Tian Z, Ma H, Xu Y, Qu W, et al. Performance of Pt/MgAPO-11 Catalysts in the Hydroisomerization of n-dodecane. Catal Lett. 2006;109:139–45. doi:10.1007/s10562-006-0070-6.

Agliullin MR, Kutepov BI, Ostroumova VA, Maximov AL. Silicoaluminophosphate Molecular Sieves SAPO-11 and SAPO-41: Synthesis, Properties, and Applications for Hy-droisomerization of C16+ n-Paraffins. Part 2: Current State of Research on Methods to Control the Crystal Morphology, Dispersion, Acidic Properties, Secondary Porous Structure, and Catalytic Properties of SAPO-11 and SAPO-41 in Hydroi-somerization of C16+ n-Paraffins (A Review). Pet Chem. 2021;61:852–70. doi:10.1134/S096554412108003X.

Agliullin MR, Kutepov BI, Ostroumova VA, Maximov AL. Silicoaluminophosphate Molecular Sieves SAPO-11 and SAPO-41: Synthesis, Properties, and Applications for Hy-droisomerization of C16+ n-Paraffins. Part 1: Current State of Research on SAPO-11 and SAPO-41 Synthesis (A Review). Pet Chem. 2021;61:836–51. doi:10.1134/S0965544121080028.

Wang P, Liu H, Wang C, Lv G, Wang D, Ma H, et al. Direct synthesis of shaped MgAPO-11 molecular sieves and the catalytic performance in n -dodecane hydroisomerization. RSC Adv 2021;11:25364–74. doi:10.1039/D1RA03758G.

Tao S, Li X, Gong H, Jiang Q, Yu W, Ma H, et al. Confined-space synthesis of hierarchical MgAPO-11 molecular sieves with good hydroisomerization performance. Microporous and Mesoporous Materials 2018;262:182–90. doi:10.1016/j.micromeso.2017.11.041.

Chen Z, Song W, Zhu S, Lai W, Yi X, Fang W. Synthesis of a multi-branched dandelion-like SAPO-11 by an in situ inocu-lating seed-induced-steam-assisted conversion method (SISAC) as a highly effective hydroisomerization support. RSC Adv. 2017;7:4656–66. doi:10.1039/c6ra26522g.

Chen Z, Li X, Xu Y, Dong Y, Lai W, Fang W, et al. Fabrication of nano-sized SAPO-11 crystals with enhanced dehydration of methanol to dimethyl ether. Catalysis Communications. 2018;103:1–4. doi:10.1016/j.catcom.2017.09.002.

Jin D, Ye G, Zheng J, Yang W, Zhu K, Coppens M-O, et al. Hierarchical Silicoaluminophosphate Catalysts with En-hanced Hydroisomerization Selectivity by Directing the Orientated Assembly of Premanufactured Building Blocks. ACS Catal. 2017;7:5887–902. doi:10.1021/acscatal.7b01646.

Jin D, Li L, Ye G, Ding H, Zhao X, Zhu K, et al. Manipulating the mesostructure of silicoaluminophosphate SAPO-11 tumbling-assisted, oriented assembly crystallization: a pathway to enhance selectivity in hydroisomerization. Catal Sci Technol. 2018;8:5044–61. doi:10.1039/c8cy01483c.

Guo L, Bao X, Fan Y, Shi G, Liu H, Bai D. Impact of cationic surfactant chain length during SAPO-11 molecular sieve synthesis on structure, acidity, and n-octane isomerization to di-methyl hexanes. Journal of Catalysis. 2012;294:161–70. doi:10.1016/j.jcat.2012.07.016.

Chen B, Huang Y. Examining the Self-Assembly of Mi-croporous Material AlPO4-11 by Dry-Gel Conversion. J Phys Chem C. 2007;111:15236–43. doi:10.1021/jp071868f.

Agliullin MR, Serebrennikov DV, Kutepov BI. Changing Template/Al2O3 Ratio in Reaction Gel—An Effective Way to Regulate Nature of Intermediate Phases and Properties of SAPO-11 Molecular Sieves during Crystallization. Materials. 2024;17:1359. doi:10.3390/ma17061359.

Agliullin MR, Shamanaeva IA, Zabirov AR, Lazarev VV, Maistrenko VN, Kutepov BI. Influence of the Nature of the Al Source on the Properties of the Initial Reaction Gels for Crystallization of Molecular Sieve AlPO4-11. Pet Chem. 2022;62:291–300. doi:10.1134/S096554412203001X.

Agliullin MR, Kolyagin YG, Serebrennikov DV, Grigor’eva NG, Dmitrenok AS, Maistrenko VN, et al. Acid properties and morphology of SAPO-11 molecular sieve controled by silica source. Microporous and Mesoporous Materials. 2022;338:111962. doi:10.1016/j.micromeso.2022.111962.

Elanany M, Vercauteren DP, Kubo M, Miyamoto A. The acid-ic properties of H-MeAlPO-5 (Me=Si, Ti, or Zr): A periodic density functional study. Journal of Molecular Catalysis A: Chemical. 2006;248:181–4. doi:10.1016/j.molcata.2005.12.026.

Mortén M, Cordero-Lanzac T, Cnudde P, Redekop EA, Svelle S, Van Speybroeck V, et al. Acidity effect on benzene meth-ylation kinetics over substituted H-MeAlPO-5 catalysts. Journal of Catalysis. 2021;404:594–606. doi:10.1016/j.jcat.2021.11.002.

Su B, Sanchez C, Yang X. Hierarchically Structured Porous Materials: From Nanoscience to Catalysis, Separation, Op-tics, Energy, and Life Science. 1st ed. Wiley; 2011. doi:10.1002/9783527639588.

Cejka J, Bekkum H van, Corma A, Schueth F. Introduction to Zeolite Molecular Sieves. Elsevier; 2007.

Kurttepeli M, Locus R, Verboekend D, De Clippel F, Breyn-aert E, Martens J, et al. Synthesis of aluminum-containing hierarchical mesoporous materials with columnar meso-pore ordering by evaporation induced self-assembly. Mi-croporous and Mesoporous Materials. 2016;234:186–95. doi:10.1016/j.micromeso.2016.07.002.

Wang H-Q, Cui Y-Q, Ding Y-L, Xiang M, Yu P, Li R-Q. Syn-thesis of Hierarchical Porous SAPO-34 and Its Catalytic Ac-tivity for 4,6-Dimethyldibenzothiophene. Front Chem. 2022;10:854664. doi:10.3389/fchem.2022.854664.

Barthomeuf D. Topological model for the compared acidity of SAPOs and SiAl zeolites. Zeolites. 1994;14:394–401. doi:10.1016/0144-2449(94)90164-3.

Zhang L, Huang Y. Crystallization and catalytic properties of molecular sieve SAPO-34 by a vapor-phase transport method. J Mater Chem A. 2015;3:4522–9. doi:10.1039/C4TA06775D.

Liu P, Ren J, Sun Y. Influence of template on Si distribution of SAPO-11 and their performance for n-paraffin isomeriza-tion. Microporous and Mesoporous Materials. 2008;114:365–72. doi:10.1016/j.micromeso.2008.01.022.

Greiser S, Gluth GJG, Sturm P, Jäger C. 29Si{27Al}, 27Al{29Si} and 27Al{1H} double-resonance NMR spectroscopy study of cementitious sodium aluminosilicate gels (geopolymers) and gel–zeolite composites. RSC Adv. 2018;8:40164–71. doi:10.1039/C8RA09246J.

Corà F, Catlow CRA, Civalleri B, Orlando R. Acid Strength of Low-Valence Dopant Ions in Microporous Zeolites and Al-POs. J Phys Chem B. 2003;107:11866–70. doi:10.1021/jp035553l.

Tamura M, Shimizu K, Satsuma A. Comprehensive IR study on acid/base properties of metal oxides. Applied Catalysis A: General. 2012;433–434:135–45. doi:10.1016/j.apcata.2012.05.008.

Yu R, Tan Y, Yao H, Xu Y, Huang J, Zhao B, et al. Toward n-Alkane Hydroisomerization Reactions: High-Performance Pt–Al2O3/SAPO-11 Single-Atom Catalysts with Nanoscale Separated Metal-Acid Centers and Ultralow Platinum Con-tent. ACS Appl Mater Interfaces. 2022;14:44377–88. doi:10.1021/acsami.2c11607.

Akhmedov VM, Al‐Khowaiter SH. Recent Advances and Fu-ture Aspects in the Selective Isomerization of High n‐Alkanes. Catalysis Reviews 2007;49:33–139. doi:10.1080/01614940601128427.

Mu C, Sun J, Xie C, Xu J, Bao J, Zhang H, et al. Bio-fuel pro-duction from hydroconversion of hexadecane over Pt/SAPO-11 catalysts. Fuel 2024;369:131732. doi:10.1016/j.fuel.2024.131732.

Yang S, Liu X, Zhang X, Sun W, Ma Q, Song N, et al. Isomer-ization Properties of Pt/SAPO-11 Catalysts for the Produc-tion of Bio-Aviation Kerosene. Catalysts 2023;13:1100. doi:10.3390/catal13071100.

Du Y, Feng B, Jiang Y, Yuan L, Huang K, Li J. Solvent‐Free Synthesis and n‐Hexadecane Hydroisomerization Perfor-mance of SAPO‐11. Eur J Inorg Chem 2018;2018:2599–606. doi:10.1002/ejic.201800134.

Said S, Zaky MT. Pt/SAPO-11 Catalysts: Effect of Platinum Loading Method on the Hydroisomerization of n-Hexadecane. Catal Lett 2019;149:2119–31. doi:10.1007/s10562-019-02783-x.

Agliullin MR, Serebrennikov DV, Gerasimov EYu, Larichev YV, Filippova NA, Zabirov AR, et al. Tailoring Silicoalumi-nophosphate SAPO-11 Nanocrystal Morphology: Silicon Con-tent as a Switch for Two-Dimensional Growth and En-hanced Catalytic Performance in Isodewaxing of Gas-to-Liquid Waxes. ACS Appl Nano Mater. 2026;9:2771–88. doi:10.1021/acsanm.5c04997.




DOI: https://doi.org/10.15826/chimtech.9774

Copyright (c) 2026 Artur Malunov, Dmitry Serebrennikov, Roman Yakovenko, Nadezhda Filippova, Svetlana Kostyleva, Marat Agliullin

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Scopus logo WorldCat logo DOAJ logo CAS logo BASE logo eLibrary logo

Chimica Techno Acta, 2014–2025
eISSN 2411-1414
Copyright Notice