Advanced sintering techniques for electrochemical and catalytic applications. Part 1: Radiation-thermal, spark plasma, flash, and microwave sintering
Abstract
Keywords
Full Text:
PDFReferences
Tamilselvan K, Samson Nesaraj A. Development of ceramic based novel materials for application in low temperature solid oxide fuel cell (LTSOFC) – A critical review. J Met Mater Miner. 2025;35(2):e2019. doi:10.55713/jmmm.v35i2.2019
Wu J, Wu X, Gao Y, Yan Z. Innovations in electric current-assisted sintering for SOFC: A review of advances in flash sintering and ultrafast high-temperature sintering. Appl Sci. 2024;14(10):3953. doi:10.3390/app14103953
Xue X, Li B. Recent advances in nanostructured perovskite oxide synthesis and application for electrocatalysis. Nanomaterials. 2025;15(6):472. doi:10.3390/nano15060472
Bilbey B, Pandey S, Zamudio-Garcia J, Savikko A, Khoshkalam Md, Esposito V, Asghar MdI. Advancement in solid oxide and protonic ceramic electrolysis cells: A review. WIREs Energy Environ. 2025;14(2):e70010. doi:10.1002/wene.70010
Pikalova EYu. Progress in infiltration technology applied to air electrodes with proton-conducting electrolyte backbones. Electrochem Mater Technol. 2025;4(2):20254054. doi:10.15826/elmattech.2025.4.054
Medvedev DA. Doping design strategies of proton-conducting perovskite oxides: A brief compositional map. Int J Hydrogen Energy. 2025;161:150689. doi:10.1016/j.ijhydene.2025.150689
Belousov VV. Partly melted oxide functional materials with rapid bulk and surface oxygen kinetics for green energy. J Am Ceram Soc. 2026;109(3):e70606. doi:10.1111/jace.70606
Belousov VV. Oxygen separation technology beyond conventional ceramic ion transport membrane materials – A perspective. Adv Eng Mater. 2025;27(20):2500719. doi:10.1002/adem.202500719
Kanth MS, Lakshmi Sandhya Rani S, Raja VK. Advancing ceramic membrane technology in chemical industries applications by evaluating cost-effective materials, fabrication and surface modification methods. Hybrid Adv. 2025;8:100380. doi:10.1016/j.hybadv.2025.100380
Casadio S, Gondolini A, Mercadelli E, Sanson A. Advances and prospects in manufacturing of ceramic oxygen and hydrogen separation membranes. Renew Sustain Energy Rev. 2024;200:114600. doi:10.1016/j.rser.2024.114600
Kang X, Yang Q, Ma J, Sun Q, Cheng H. Advances in ceramic–carbonate dual-phase membrane reactors for direct CO2 separation and utilization. Membranes. 2025;15(2):53. doi:10.3390/membranes15020053
Alsaeedi S, Zhang R, Yan B, Wang Z, Li J, Al-Hakeem B, Chen G. A review of biomass energy and gasification: Bibliometrics, hotspots and emerging trends. Biomass Bioenergy. 2026;207:108797. doi:10.1016/j.biombioe.2025.108797
Sahoo S. Wickramathilaka KY, Njeri E, Silva D, Suib SL. A review on transition metal oxides in catalysis. Front Chem. 2024;12:1374878. doi:10.3389/fchem.2024.1374878
Jurado J, Trejo F, Ancheyta J, Elyshev A, Zagoruiko A. A comprehensive analysis of kinetic models for methane autothermal reforming reactions. Fuel. 2025;386:134136. doi:10.1016/j.fuel.2024.134136
Miao W J, Wang S Q, Wang Z H, Wu F B, Zhang Y Z, Ouyang J H, Wang Y M, Zou Y C. Additive manufacturing of advanced structural ceramics for tribological applications: Principles, techniques, microstructure and properties. Lubricants. 2025;13(3):112. doi:10.3390/lubricants13030112
Nie WL. Bridging the gap: The harmonious marriage of ceramic and fiber in functional art. Educ Humanit. 2025;1(1):47–66. doi:10.63313/EH.9008
Shishir MdKH, Afrin S, Sachchu MdMH, Eva TN, Tabassum S, Ahmed S, Sadia SI, Alam MdA. Crystalline copper nanomaterials for advanced ceramic: A comprehensive review for functional ceramic coating approaches. Asian J Adv Res Rep. 2025;18(8):13–34. doi:10.9734/ajarr/2024/v18i8706
Decterov SA. Thermodynamic database for multicomponent oxide systems. Chim Tech Acta. 2018;5(1):16–48. doi:10.15826/chimtech.2018.5.1.02
Peng Q Q, Zhang B D, Liu M, Gao R, Zhou Y J, Luo X P, Luo B Y, Hai Dou W. Research status and prospects of metal/ceramic composite functional protective coatings. Crit Rev Solid State Mater Sci. 2025;1–46. doi:10.1080/10408436.2025.2527605
Pasagada VKV, Yang N, Xu C. Electron beam sintering (EBS) process for ultra-high temperature ceramics (UHTCs) and the comparison with traditional UHTC sintering and metal electron beam melting (EBM) processes. Ceram Int. 2022;48(7):10174–86. doi:10.1016/j.ceramint.2021.12.229
Dunyushkina L. Field-assisted sintering of refractory oxygen-ion and proton conducting ceramics. Electrochem Mater Technol. 2024;3(3):20243040. doi:10.15826/elmattech.2024.3.040
Gorelov V. Fast sintering of ceramics. Electrochem Mater Technol. 2024;3(3):20243041. doi:10.15826/elmattech.2024.3.041
Gavalda-Diaz O, Saiz E, Chevalier J, Bouville F. Toughening of ceramics and ceramic composites through microstructure engineering: A review. Int Mater Rev. 2025;70(1):3–30. doi:10.1177/09506608241308337
Sun H, Zou B, Wang X, Chen W, Zhang G, Quan T, Huang V. Advancements in multi-material additive manufacturing of advanced ceramics: A review of strategies, techniques and equipment. Mater Chem Phys. 2024;319:129337. doi:10.1016/j.matchemphys.2024.129337
Xue M, Yi M. Phase-field simulation of sintering process: A review. CMES Comput Model Eng Sci. 2024;140(2):1165–204. doi:10.32604/cmes.2024.049367
Cho H, Park J, Yoo J, Lee H, Yu W. Advanced sintering of solid oxide fuel cells: Microstructure and interfaces. Renew Sustain Energy Rev. 2027;244B:117500. doi:10.1016/j.rser.2026.117500
Xu W, Lv P, Li J, Yang J, Cao L, Huang J. Advances in fabrication technologies of advanced ceramics and high-quality development trends in catalytic applications. Catalysts. 2026;16(1):79. doi:10.3390/catal16010079
Mohammed AOA, Hamdan YM, Ali HO. Additive manufacturing of ceramic components: A review of 3D printing technologies for industrial applications. Saudi J Eng Technol. 2026;11(1):1–22. doi:10.36348/sjet.2026.v11i01.001
Mandal G, Haldar B, Samanta R, Ma G, Kunar S, Ataya S, Nath M, Ghosh SK. Novel features, applications, and recent developments of high-entropy ceramic coatings: A state-of-the-art review. Coatings. 2026;16(1):48. doi:10.3390/coatings16010048
Gupta AK, Taufik Md. Fabrication of functionally graded materials: A review. In: Advances in Materials and Agile Manufacturing. Singapore: Springer; 2023. pp. 79–89. doi:10.1007/978-981-99-6601-1_8
Dunyushkina LA. Densification of proton-conducting ABO3 (A = Ca, Sr, Ba; B = Zr, Hf) based ceramics: Review of sintering technologies and their impact on charge transport properties. J Eur Ceram Soc. 2025;45(2):116908. doi:10.1016/j.jeurceramsoc.2024.116908
Dai X, Xu F, Bai H. Recent progress on design and fabrication of porous ceramics for solid oxide fuel cells. J Am Ceram Soc. 2025;108(11):e70054. doi:10.1111/jace.70054
Nie H, Liu Z, Xiao M, Yang G, Li T, Starostina IA, Medvedev DA, Wang W, Zhou W, Ran R. Recent advances and challenges in perovskite-based protonic ceramic electrolytes: Design strategies and fabrication innovations. Adv Funct Mater. 2025;35(10):2416651. doi:10.1002/adfm.202416651
Mamaghani KR, Parvin N. Cold sintering for quantum ceramics: A low-temperature route to topological and spin–orbit-coupled materials. J Alloys Compd Commun. 2025;8:100118. doi:10.1016/j.jacomc.2025.100118
Chen Y, Yu C, Cheng X, Wang R, Deng C, Ding J, Liu Z, Ma B, Zhu H, Hu J, Tan C. Advances in sintering technologies for SiC ceramics: Mechanisms, challenges, and industrial applications. High Temp Mater. 2025;2(3):10013. doi:10.70322/htm.2025.10013
Zhang Y, Wei J, Li X, Miao Z, Hou J, Wang P, Lv E, Yao Y, Zhang K. Sintering, toughening mechanism and amorphization of B4C-based ceramic composites: A review. J Eur Ceram Soc. 2025;45(4):117075. doi:10.1016/j.jeurceramsoc.2024.117075
Han Y, Zhou W, Li J, Han Z, Bi L, Zhang Z, Wang Y, Li L, Zhao D. Enhanced mechanical properties and in vitro bioactivity of silicon nitride ceramics with SiO2, Y2O3, and Al2O3 as sintering aids. J Mech Behav Biomed Mater. 2025;164:106901. doi:10.1016/j.jmbbm.2025.106901
Abd HNSQ, Akidah BN, Mohamad YR, Wan YWNA, Rao SM. Sintering of spinel catalysts for solid oxide fuel cell applications: A review of the microstructure, conductivity, and electrochemical performance. Ceramics-Silikáty. 2025;69(4):517–33. doi:10.13168/cs.2025.0034
Vaghef-Koodehi A. Processing–structure–property relationships in nanostructured ZnO varistors: Effects of advanced sintering and additive design. Ceram Int. 2026;52(18):33045–57. doi:10.1016/j.ceramint.2025.10.392
German RM, Suri P, Park SJ. Review: Liquid phase sintering. J Mater Sci. 2009;44(1):1–39. doi:10.1007/s10853-008-3008-0
Kang S JL. Sintering: Densification, Grain Growth, and Microstructure. Butterworth-Heinemann: Elsevier; 2005. 280 p.
Dudina DV. Sintering of Powder Materials: A Study Guide. Novosibirsk: NSTU Publisher; 2022. 243 p. doi:10.17212/978-5-7782-4515-0
Mukasyan AS, Rogachev AS, Moskovskikh DO, Yermekova ZhS. Reactive spark plasma sintering of exothermic systems: A critical review. Ceram Int. 2022;48(3):2988–98. doi:10.1016/j.ceramint.2021.10.207
Gordeev EV, Porotnikova NM. Approaches for the preparation of dense ceramics and sintering aids for Sr/Mg doped lanthanum gallate: Focus review. Electrochem Mater Technol. 2023;2(4):20232022. doi:10.15826/elmattech.2023.2.022
Zolhafizi J, Azham Azmi M, Rahman HA, Zakaria H, Hassan S, Mahzan S, Ismail A, Ariffin AMT, Tukimon MF, Yusof UA, Baharuddin NA. Samarium doped ceria (SDC) electrolyte modification by sintering aids addition to reducing sintering temperature: A review. J Kejurut. 2023;35(1):65–76. doi:10.17576/jkukm-2023-35(1)-07
Loganathan S, Biswas S, Kaur G, Giddey S. Role of sintering aids in electrical and material properties of yttrium- and cerium-doped barium zirconate electrolytes. Processes. 2024;12(10):2278. doi:10.3390/pr12102278
Li J, Wang C, Wang X, Bi L. Sintering aids for proton-conducting oxides – A double-edged sword? A mini review. Electrochem Commun. 2020;112:106672. doi:10.1016/j.elecom.2020.106672
Hostaša J, Picelli F, Hříbalová S, Nečina V. Sintering aids, their role and behaviour in the production of transparent ceramics. Open Ceram. 2021;7:100137. doi:10.1016/j.oceram.2021.100137
Ha S J, Cha H A, Choi J J, Hahn B D, Ahn C W, Moon YK. Designing oxide fillers for advanced thermal interface materials: Recent progress and future perspectives. Small Struct. 2026;7(1):e202500823. doi:10.1002/sstr.202500823
Dudina DV, Georgarakis K, Olevsky EA. Progress in aluminium and magnesium matrix composites obtained by spark plasma, microwave and induction sintering. Int Mater Rev. 2023;68(2):225–46. doi:10.1080/09506608.2022.2077029
Sadykov V, Usoltsev V, Fedorova Yu, Mezentseva N, Krieger T, Eremeev N., Arapova M, Ishchenko A, Salanov A, Pelipenko V, Muzykantov V, Ulikhin A, Uvarov N, Bobrenok O, Vlasov A, Korobeynikov M, Bryazgin A, Arzhannikov A, Kalinin P, Smorygo O, Thumm M. Advanced sintering techniques in design of planar IT SOFC and supported oxygen separation membranes. In: Sintering of Ceramics – New Emerging Techniques. Vienna: InTech; 2012. pp. 121–40. doi:10.5772/34958
Eremeev N, Bespalko Yu, Mikhailenko M, Korobeynikov M, Sadykov V. Radiation-thermal sintering of oxide and composite materials for hydrogen energy by electron beam: A review. Electrochem Mater Technol. 2025;4(4):20254062. doi:10.15826/elmattech.2025.4.062
Yu M, Feng Q, Liu Z, Zhang P, Zhu X, Mu S. Recent novel fabrication techniques for proton-conducting solid oxide fuel cells. Crystals. 2024;14(3):225. doi:10.3390/cryst14030225
Pavlov YuS, Petrenko VV, Alekseev PA, Bystrov PA, Souvorova OV. Trends and opportunities for the development of electron-beam energy-intensive technologies. Radiat Phys Chem. 2022;198:110199. doi:10.1016/j.radphyschem.2022.110199
Klimov AS, Bakeev IYu, Dvilis ES, Oks EM, Zenin AA. Electron beam sintering of ceramics for additive manufacturing. Vacuum. 2019;169:108933. doi:10.1016/j.vacuum.2019.108933
Lenel FV. Resistance sintering under pressure. JOM. 1955;7(1):158–67. doi:10.1007/BF03377473
Gallardo JM, Agote I, Astacio R, Schubert T, Cintas J, Montes JM, Torres Y, Cuevas FG. Hard metal production by ERS: Processing parameter roles in final properties. Metals. 2019;9(2):172. doi:10.3390/met9020172
Dudina DV, Bokhonov BB, Olevsky EA. Fabrication of porous materials by spark plasma sintering: A review. Materials. 2019;12(3):541. doi:10.3390/ma12030541
Tokita M. Progress of spark plasma sintering (SPS) method, systems, ceramics applications and industrialization. Ceramics. 2021;4(2):160–98. doi:10.3390/ceramics4020014
Guillon O, Gonzalez-Julian J, Dargatz B, Kessel T, Schierning G, Räthel J, Herrmann M. Field-assisted sintering technology/spark plasma sintering: Mechanisms, materials, and technology developments. Adv Eng Mater. 2014;16(7):830–49. doi:10.1002/adem.201300409
Li Y, Dong S, Bai Q, Zhang H, Zhang Q, Li Q. New developments of biomedical porous titanium alloys prepared by spark plasma sintering. Metals Adv. 2026;41:72–84. doi:10.1016/j.metadv.2026.02.010
Yurlova MS, Demenyuk VD, Lebedeva LYu, Dudina DV, Grigoryev EG, Olevsky EA. Electric pulse consolidation: An alternative to spark plasma sintering. J Mater Sci. 2014.;49(3):952–85. doi:10.1007/s10853-013-7805-8
Hermel W, Leitner G, Krumphold R. Review of induction sintering: Fundamentals and applications. Powder Metall. 1980;23(3):130–5. doi:10.1179/pom.1980.23.3.130
Sing SL, Yeong WY, Wiria FE, Tay BY, Zhao Z, Zhao L, Tian Z, Yang S. Direct selective laser sintering and melting of ceramics: A review. Rapid Prototyp J. 2017;23(3):611–23. doi:10.1108/RPJ-11-2015-0178
Qian B, Shen Z. Laser sintering of ceramics. J Asian Ceram Soc. 2013;1(4):315–21. doi:10.1016/j.jascer.2013.08.004
Grossin D, Montón A, Navarrete-Segado P, Özmen E, Urruth G, Maury F, Maury D, Frances C, Tourbin M, Lenormand P, Bertrand G. A review of additive manufacturing of ceramics by powder bed selective laser processing (sintering / melting): Calcium phosphate, silicon carbide, zirconia, alumina, and their composites. Open Ceram. 2021;5:100073. doi:10.1016/j.oceram.2021.100073
Choi YM, Lee YL, Lim ES, Trimzi MA, Hwangbo SA, Ham YB. Performance improvement of ring-type PZT ceramics for ultrasonic dispersion system. Micromachines. 2020;11(2):44. doi:10.3390/mi11020144
Wang W, Ma S, Fuh JYH, Lu L, Liu Y. Processing and characterization of laser-sintered Al2O3/ZrO2/SiO2. Int J Adv Manuf Technol. 2013;68(9–12):2565–9. doi:10.1007/s00170-013-4863-7
Yan J, Wang X, Chen K, Lee KN, Sintering modeling of thermal barrier coatings at elevated temperatures: A review of recent advances. Coatings. 2021;11(10):1214. doi:10.3390/coatings11101214
Tsao C Y, Tuan W H, Feng K C, De-sintering of Ba5Nb4O15 ceramic and its influence on microwave characteristics. J Eur Ceram Soc. 2017;37(4):1517–21. doi:10.1016/j.jeurceramsoc.2016.11.002
Zhu L F, Zhang B P, Duan J Q, Xun B W, Wang N, Tang Y C, Zhao G L. Enhanced piezoelectric and ferroelectric properties of BiFeO3–BaTiO3 lead-free ceramics by optimizing the sintering temperature and dwell time. J Eur Ceram Soc. 2018;38(10):3463–71. doi:10.1016/j.jeurceramsoc.2018.03.044
Singarapu B, Galusek D, Durán A, Pascual MJ. Glass-ceramics processed by spark plasma sintering (SPS) for optical applications. Appl Sci. 2020;10(8):2791. doi:10.3390/app10082791
Martynczuk J, Arnold M, Feldhoff A. Influence of grain size on the oxygen permeation performance of perovskite-type (Ba0.5Sr0.5)(Fe0.8Zn0.2)O3−δ membranes. J Membr Sci. 2008;322:375–82. doi:10.1016/j.memsci.2008.05.064
Mezghani K, Hamza A, Habib MdA, Lee D, Shao-Horn Y. Effect of microstructure and thickness on oxygen permeation of La2NiO4+δ membranes. Ceram Int. 2016;42(1):666–72. doi:10.1016/j.ceramint.2015.08.163
Biesuz M, Karacasulu L. Ultra-fast sintering and grain boundary metastability in ceramics. Curr Opin Solid State Mater Sci. 2026;42:101258. doi:10.1016/j.cossms.2026.101258
Karacasulu L, Manière C, Vakifahmetoglu C, Marinel S, Biesuz M. Sintering under high heating rates. Annu Rev Mater Res. 2025;55:203–30. doi:10.1146/annurev-matsci-080323-042441
Zhou W, Fan Z, Jiang H, Wu Z, Liu Z, Zhang G, Jin W. Cold sintering of perovskite-based mixed conducting membrane for oxygen separation. AIChE J. 2024;70(4):e18378. doi:10.1002/aic.18378
Guo X, Zhang Z. Grain size dependent grain boundary defect structure: Case of doped zirconia. Acta Mater. 2003;51(9):2539–47. doi:10.1016/S1359-6454(03)00052-1
Rheinheimer W, Phuah XL, Wang H, Lemke F, Hoffmann MJ, Wang H. The role of point defects and defect gradients in flash sintering of perovskite oxides. Acta Mater. 2019;165:398–408. doi:10.1016/j.actamat.2018.12.007
Šiška Z, Sojková T, Sojka M, Roupcová P, Mihálik M, Bukvišová K, Krishnan D, Šimoníková L, Gröger R, Pizúrová N. Microtron electron beam enables post-synthetic defect engineering in ultrasmall ceria nanocrystals. Nanoscale Adv. 2026;8(13):3666–79. doi:10.1039/d6na00191b
Symington AR, Molinari M, Brincat NA, Williams NR, Parker SC. Defect segregation facilitates oxygen transport at fluorite UO2 grain boundaries. Philos Trans A Math Phys Eng Sci. 2019;377(2152):20190026. doi:10.1098/rsta.2019.0026y
Annenkov YuM. Physical foundations for high-temperature electron-beam modification of ceramics. Russ Phys J. 1996;39(11):1146–59. doi:10.1007/BF02436157
Boldyrev VV, Abramson IG, Arshakuni RG, Auslender WL, Weissmann AF, Volkonsky BV, Voronin AP, Danyushevsky SI, Egorov GB, Kanimov BK, Nikiforov YuV, Oganesyan PL, Polyakov VA, inventors; Institute of Solid State Chemistry and Mechanochemistry, assignee. Yavleniye radiatsionno-termicheskoy aktivatsii tverdofaznykh khimicheskikh reaktsiy v neorganicheskikh sistemakh [The phenomenon of radiation-thermal activation of solid-state chemical reactions in inorganic systems]. Certificate of discovery No. 127. 1999 Sep 9. Russian.
Gonzalez-Martinez IG, Bachmatiuk A, Bezugly V, Kunstmann J, Gemming T, Liu Z, Cuniberti G, Rümmeli MH. Electron-beam induced synthesis of nanostructures: A review. Nanoscale. 2016;8(22):11340–62. doi:10.1039/c6nr01941b
Čubová K, Čuba V. Synthesis of inorganic nanoparticles by ionizing radiation – A review. Radiat Phys Chem. 2020;169:108774. doi:10.1016/j.radphyschem.2020.108774
Klimov AS, Bakeev IYu, Oks EM, Tran VT, Zenin AA. Electron beam sintering of gradient Al2O3–ZrO2 ceramics with the forevacuum plasma electron source. J Phys Conf Ser. 2020;1488:012010. doi:10.1088/1742-6596/1488/1/012010
Klimov AS., Bakeev IYu, Oks EM, Zenin AA. Electron-beam sintering of an Al2O3/Ti composite using a forevacuum plasma-cathode electron source. Ceram Int. 2020;46(14):22276–81. doi:10.1016/j.ceramint.2020.05.306
Patterson T, Hochanadel J, Sutton S, Panton B, Lippold J. A review of high energy density beam processes for welding and additive manufacturing applications. Weld World. 2021;65(7):1235–306. doi:10.1007/s40194-021-01116-0
Birkhoff RD. The passage of fast electrons through matter. In: Corpuscles and Radiation in Matter II / Korpuskeln und Strahlung in Materie II. Encyclopedia of Physics / Handbuch der Physik, vol 6 / 34. Berlin, Heidelberg: Springer; 1958. pp. 53–138. doi:10.1007/978-3-642-45898-9_2
Pikaev AK. Sovremennaya radiatsionnaya khimiya, Tom 1, Osnovnyye polozheniya, experimental’naya tekhnika i metody [Modern radiation chemistry, Volume 1, Basics, experimental techniques and methods]. Moscow: Nauka; 1985. 376 p. Russian.
Kharisov BI, Kharissova OV. Main ionizing radiation types and their interaction with matter. In: Radiation Synthesis of Materials and Compounds. CRC Press; 2013. pp. 1–26. doi:10.1201/b14531-5
Prelas M. Radiation interaction with matter. In: Nuclear-Pumped Lasers. Springer, Cham; 2016. pp. 63–100. doi:10.1007/978-3-319-19845-3_2
Baturitsky MA. Vzaimodeystviye ioniziruyushchego izlucheniya s veshchestvom [Interaction of ionizing radiation with matter]. Minsk: Internation Sakharov Environmental University; 2005. 118 p. Russian.
Goldstein JI, Newbury DE, Echlin P, Joy DC, Fiori C, Lifshin E. Electron-beam-specimen interactions. In: Scanning Electron Microscopy and X-Ray Microanalysis. Boston: Springer; 1981. pp. 53–122. doi:10.1007/978-1-4613-3273-2_3
Ohring M, Kasprzak L. Electronic charge-induced damage. In: Reliability and Failure of Electronic Materials and Devices. 2nd ed. Amsterdam, Boston, Heidelberg, London, New York, Oxford, Paris, San Diego, San Francisco, Singapore, Sydney, Tokyo: Academic Press, Elsevier; 2015. pp. 327–85. doi:10.1016/B978-0-12-088574-9.00006-9
Haug E, Nakel W. The Elementary Process Of Bremsstrahlung. World Scientific; 2004. 272 p.
Egerton RF, McLeod R, Wang F, Malac M. Basic questions related to electron-induced sputtering in the TEM. Ultramicroscopy. 2010;110(8):991–7. doi:10.1016/j.ultramic.2009.11.003
Liu L, Taylor DD, Rodrigueza EE, Zachariah MR. Influence of transition metal electronegativity on the oxygen storage capacity of perovskite oxides. Chem Commun. 2016;52(68):10369–72. doi:10.1039/C6CC01997H
Lenglet M. Iono-covalent character of the metal–oxygen bonds in oxides: A comparison of experimental and theoretical data. Active and Passive Elec Comp. 2004;27:1–60. doi:10.1080/0882751031000116142
Stoklosa A, Laskowska B. The bond energy and the composition of metal oxides. High Temp Mater Process. 2007;26(2):93–102. doi:10.1515/HTMP.2007.26.2.93
Shannon RD, Chenavas J, Joubert JC. Bond strength considerations applied to cation coordination in normal and high-pressure oxides. J Solid State Chem. 1975;12(1–2):16–30. doi:10.1016/0022-4596(75)90174-7
Shinzato Y, Saito Y, Yukawa H, Morinaga M, Baba T, Nakai H. New expression of the chemical bond in perovskite-type oxides. Mater Sci Forum. 2007;561–565:1823–6. doi:10.4028/www.scientific.net/MSF.561-565.1823
Yasuda K, Costantini J M, Baldinozzi G. Radiation-induced effects on materials properties of ceramics: Mechanical and dimensional properties. In: Comprehensive Nuclear Materials. Volume 1. 2nd ed. Elsevier; 2020. pp. 153–85. doi:10.1016/B978-0-12-803581-8.12052-1
Xiong G, Jia J, Zhao L, Liu X, Zhang X, Liu H, Zhou W. Non-thermal radiation heating synthesis of nanomaterials. Sci Bull. 2021;66(4):386–406. doi:10.1016/j.scib.2020.08.037
Knotek ML, Feibelman PJ. Ion desorption by core-hole Auger decay. Phys Rev Lett. 1978;40(14):964–7. doi:10.1103/PhysRevLett.40.964
Shi Y, Gong S, Xu H, Yang G, Qiao J, Wang Z, Zhang J, Qi B. Electron beam metal additive manufacturing: Defects formation and in-process control. J Manuf Process. 2023;101:386–431. doi:10.1016/j.jmapro.2023.06.013
Symons MCR. Chemical aspects of electron-beam interactions in the solid state. Ultramicroscopy. 1982;10(1–2):15–23. doi:10.1016/0304-3991(82)90183-8
Guo Y, Su H, Yang P, Zhao Y, Shen Z, Liu Y, Zhao D, Jiang H, Zhang J, Liu L, Fu H. A review of emerging metallic system for high-energy beam additive manufacturing: Al–Co–Cr–Fe–Ni high entropy alloys. Acta Metall Sin Engl Lett. 2022;35(9):1407–23. doi:10.1007/s40195-022-01400-y
Ghyngazov SA, Surzhikov AP, Vasil’ev IP, Boltueva VA, Vlasov VA. Synthesis of high-entropy ceramics (Y0.2Yb0.2Lu0.2Eu0.2Er0.2)3Al5O12 by electron beam heating. Ceram Int. 2024;50(22A):45037–43. doi:10.1016/j.ceramint.2024.08.342
Ghyngazov SA, Boltueva VA, Vasil’ev IP. Synthesis of oxide ceramics in a beam of fast electrons. Bull Univ Karaganda Phys. 2024;29(4):27–34. doi:10.31489/2024ph4/27-34
Kostishyn VG, Trukhanov AV, Alekseev AA, Scherbakov SV, Isaev IM, Mironovich AYu, Skorlupin GA, Sysoev MA, Tokin GM. Crystal and magnetic structure of hexagonal anisotropic polycrystalline ferrites SrFe12O19 obtained by radiation-thermal sintering. Mod Electron Mater. 2025;11(2):111–23. doi:10.3897/j.moem.11.2.163141
Chen JY T, Rensch DB. The use of refractory metal and electron-beam sintering to reduce contact resistance for VLSI. IEEE Trans Electron Devices. 1983;30(11):1542–50. doi:10.1109/T-ED.1983.21335
Zyball A. Production and crosslinking of multi-layer tubes (PE & metal) by e-beam. Radiat Phys Chem. 2000;57(3–6):543–7. doi:10.1016/S0969-806X(99)00423-5
Eremeev N, Sadovskaya E, Krieger T, Bulavchenko O, Kaichev V, Kremneva A, Suprun E, Mohammed MK, Mikhailenko M, Korobeinikov M, Sadykov V, Bespalko Yu. E-beam sintering of neodymium tungstate and its composite with nickel (II) and copper (II) oxides. Electrochem Mater Technol. 2026;5(3):20265077. doi:10.15826/elmattech.2026.5.077
Surzhikov AP, Frangulyan TS, Ghyngazov SA, Vasil’ev IP, Chernyavskii AV. Sintering of zirconia ceramics by intense high-energy electron beam. Ceram Int. 2016;42(12):13888–92. doi:10.1016/j.ceramint.2016.05.198
Pikaev AK. Sovremennaya radiatsionnaya khimiya, Tom 3, Tvyordoye telo i polimery. Prikladnyye aspekty [Modern radiation chemistry, Volume 3, Solid state and polymers. Applied Aspects]. Nauka, Moscow; 1987. 448 p. Russian.
Dapor M. Theory of the interaction between an electron beam and a thin solid film. Surf Sci. 1992;269–270:753–62. doi:10.1016/0039-6028(92)91345-C
Zel’dovich YaB, Raizer YuP. Annu Rev Fluid Mech. 1969;1:385–412. doi:10.1146/annurev.fl.01.010169.002125
Gus’kov SYu, Kuchugov PA, Vergunova GA. Matter Radiat Extremes. 2021;6(2):020301. doi:10.1063/5.0026002
Duke CB. J Vac Sci Technol. 1978;15(2):157–69. doi:10.1116/1.569447
Joy DC. Scanning. 1995;17(5):270–5. doi:10.1002/sca.4950170501
Riviere JP. Radiation induced point defects and diffusion. In: Application of Particle and Laser Beams in Materials Technology. NATO ASI Series, vol 283. Dordrecht: Springer; 1995. pp. 53–76. doi.:10.1007/978-94-015-8459-3_4
Stepanov VA. Tech Phys. 1998;43(8):938–42. doi:10.1134/1.1259104
Charlesby A. Atomic radiation and polymers. Oxford, London, New York, Paris: Pergamon Press; 1960. 570 p. doi:10.1016/C2013-0-07861-9
Walker II RC, Shi T, Silva EC, Jovanovic I, Robinson JA. Phys Status Solidi A. 2016;213(12):3065–77. doi:10.1002/pssa.201600395
Bracht H. Phys B Condens Matter. 2006;376–377:11–8. doi:10.1016/j.physb.2005.12.006
Butyagin PYu. Russ Chem Rev. 1971;40(11):901–15. doi:10.1070/RC1971v040n11ABEH001982
Hamilton BW, Sakano MN, Li C, Strachan A. Annu Rev Mater Res. 2021;51:101–30. doi:10.1146/annurev-matsci-080819-120123
Cuccu F, De Luca L, Delogu F, Colacino E, Solin N, Mocci R, Porcheddu A. ChemSusChem. 2022;15(17):e202200362. doi:10.1002/cssc.202200362
Allen TR, Was GS. Radiation-enhanced diffusion and radiation-induced segregation. In: Radiation Effects in Solids. NATO Science Series, vol 235. Dordrecht: Springer; 2007. pp. 123–51. doi:10.1007/978-1-4020-5295-8_6
Uglov VV. Radiatsionnye effecty v tvyordykh telakh [Radiation effects in solid-state bodies]. Minsk: BSU; 2011. 207 p. Russian.
Ryazanov VV. Radiat Phys Chem. 2023;203A:110608. doi:10.1016/j.radphyschem.2022.110608
Dzhafarov TD. Phys Stat Sol B. 1989;155(1):11–51. doi:10.1002/pssb.2221550102
Dienes GJ, Damask AC. J Appl Phys. 1958;29(12):1713–21. doi:10.1063/1.1723032
Bourgoin JC, Corbett JW. Radiat Effects. 1978;36(3–4):157–88. doi:10.1080/00337577808240846
Peak D, Corbett JW, Bourgoin JC. J Chem Phys. 1976;65(3):1206–10. doi:10.1063/1.433143
Tyurin YuI, Nikitenkov NN, Larionov VV. Russ J Phys Chem. 2011;85(6):1047–53. doi:10.1134/S0036024411060318
Lyakhov NZ, Boldyrev VV, Voronin AP, Gribkov OS, Bochkarev LG, Rusakov SV, Auslender VL. J Thermal Anal. 1995;43(1):21–31. doi:10.1007/BF02635965
Auslender VL, Bochkarev IG, Boldyrev VV, Lyakhov NZ, Voronin AP. Solid State Ionics. 1997;101–103(1):489–93. doi:10.1016/S0167-2738(97)84073-8
Lam NQ, Rothman SJ. Radiation-enhanced diffusion in metals and alloys. Argonne, Ill.: Argonne National Lab.; 1974. 32 p. Available from: https://www.osti.gov/biblio/4084880, Accessed on 6 February 2026
Meftah A, Costantini JM, Djebara M, Khalfaoui N, Stoquert JP, Studer F, Toulemonde M. Thermal spike model applied to the irradiated yttrium iron garnet: Nucl Instrum Methods Phys Res B Beam Interact Mater At. 1997;122(3):470–5. doi:10.1016/S0168-583X(96)00666-0
Indutnyi I, Mynko V, Sopinskyy M, Lytvyn P. J Non-Cryst Solids. 2023;618:122513. doi:10.1016/j.jnoncrysol.2023.122513
Turaeva NN, Oksengendler BL, Rashidova SSh. Synth Met. 2000;115(1–3):173–6. doi:10.1016/S0379-6779(00)00329-5
Wang X, Zhang H, Baba T, Jiang H, Liu C, Guan Y, Elleuch O, Kuech T, Morgan D, Idrobo J C, Voyles PM. Nat Mater. 2020;19(9):992–8. doi:10.1038/s41563-020-0683-y
Pells GP. MRS Bull. 1997;22(4):22–8. doi:10.1557/S0883769400032991
Han X. A Systematic Study of Radiation Enhanced Diffusion; Theoretical Improvement and Application [dissertation]. Urbana (USA): University of Illinois Urbana-Champaign; 2014. 195 p.
Damask AC. Radiat Eff. 1969;1(2):95–100. doi:10.1080/00337576908235479
Pappas HK, Heuser BJ, Strehle MM. J Nucl Mater. 2010;405(2):118–25. doi:10.1016/j.jnucmat.2010.07.042
Martin P, Chevarier A, Panczer G. J Nucl Mater. 2000;278(2–3):202–6. doi:10.1016/S0022-3115(99)00254-8
Madden NJ. Ceramic Interfaces and Their Radiation Response [dissertation]. Urbana (USA): University of Illinois Urbana-Champaign; 2021. 152 p.
Zinkle SJ. Mat Res Soc Symp Proc. 1997;439:667–78. doi:10.1557/PROC-439-667
Devanathan R, Sickafus KE, Weber WJ, Nastasi M. J Nucl Mater. 1998;253(1–3):113–9. doi:10.1016/S0022-3115(97)00307-3
Zinkle SJ, Snead LL. Nucl Instrum Methods Phys Res B Beam Interact Mater At. 1996;116(1–4):92–101. doi:10.1016/0168-583X(96)00016-X
Zinkle SJ, Skuratov VA, Hoelzer DT. Nucl Instrum Methods Phys Res B Beam Interact Mater At. 2002;191(1–4):758–66. doi:10.1016/S0168-583X(02)00648-1
Ossi PM. J Nucl Mater. 2001;289(1–2):80–5. doi:10.1016/S0022-3115(00)00685-1
Parveen R, Kalita P, Shukla R, Grover V, Pandey R, Sattonnay G, Avasthi DK. Nucl Instrum Methods Phys Res B Beam Interact Mater At. 2024;551:165344. doi:10.1016/j.nimb.2024.165344
Indutnyi IZ, Mynko VI, Sopinskyy MV, Dan’ko VA, Lytvyn PM. Semicond Phys Quant Electron Optoelectron. 2021;24(4):436–43. doi:10.15407/spqeo24.04.436
Dolidze N, Eristavi G, Jibuti Z. Georgian Electron Sci J Phys. 2009;1(1):72–5.
Manır M, Mando M, Aytemiz G, Nevruzoğlu V. Turkish J Electromec Energy. 2023;8(1):21–8.
Zhang Y, Huang Z, Qi J, Tang Z, Wu L, Zhang K, Lu T. J Eur Ceram Soc. 2021;41(15):7868–77. doi:10.1016/j.jeurceramsoc.2021.08.051
Croguennec L, Shao-Horn Y, Gloter A, Colliex C, Guilmard M, Fauth F, Delmas C. Chem Mater. 2009;21(6):1051–9. doi:10.1021/cm802954g
Meldrum A, Wang LM, Ewing RC. Am Mineral. 1997;82(9–10):858–69. doi:10.2138/am-1997-9-1003
Aguiar JA, Dholabhai PP, Bi Z, Jia Q, Fu EG, Wang Y, Aoki T, Zhu J, Misra A, Uberuaga BP.. Adv Mater Interfaces. 2014;1(4):1300142. doi:10.1002/admi.201300142
Levin I, Leapman RD, Kovler M, Roizin Ya. Appl Phys Lett. 2003;83(8):1548–50. doi:10.1063/1.1604182
Sadykov V, Mezentseva N, Usoltsev V, Sadovskaya E, Ishchenko A, Pavlova S, Bespalko Yu, Kharlamova T, Zevak E, Salanov A, Krieger T, Belyaev V, Bobrenok O, Uvarov N, Okhlupin Yu, Smorygo O, Smirnova A, Singh P, Vlasov A, Korobeynikov M, Bryazgin A, Kalinin P, Arzhannikov A. J Power Sources. 2011;196(17);7104–9. doi:10.1016/j.jpowsour.2010.07.096
Sochugov NS, Soloviev AA, Shipilova AV, Rabotkin SV, Rotshtein VP, Sigfusson IT. Solid State Ionics. 2013;213:11–7. doi:10.1016/j.ssi.2012.11.001
Sadykov VA, Usoltsev VV, Fedorova YuE, Sobyanin VA, Kalinin PV, Arzhannikov AV, Vlasov AYu, Korobeinikov MV, Bryazgin AA, Salanov AN, Predtechenskii MR, Bobrenok OF, Ulikhin AS, Uvarov NF, Smorygo OL, Ilyushсhenko AF, Ul’yanitskii VYu, Zlobin SB. Russ J Electrochem. 2011;47(4):488–93. doi:10.1134/S1023193511040148
Sadykov V, Usoltsev V, Yeremeev N, Mezentseva N, Pelipenko V, Krieger T, Belyaev V, Sadovskaya E, Muzykantov V, Fedorova Yu, Lukashevich A, Ishchenko A, Salanov A, Okhlupin Yu, Uvarov N, Smorygo O, Arzhannikov A, Korobeynikov M, Thumm MKA. J Eur Ceram Soc. 2013;33(12):2241–50. doi:10.1016/j.jeurceramsoc.2013.01.007
Sadykov V, Mezentseva N, Usoltsev V, Smorygo O, Mikutski V, Marukovich A, Bobrenok O, Uvarov N. Metal supported SOFC on the gradient permeable metal foam substrate. Adv Mater Res. 2010;123–125:1083–6. doi:10.4028/www.scientific.net/AMR.123-125.1083
Sadykov VA, Mezentseva NV, Usoltsev VV, Kharlamova TS, Pavlova SN, Belyaev VD, Alikina GM, Bunina RV, Pelipenko VV, Bobrova LN, Ishchenko AV, Bobrenok OPh, Uvarov NF, Okhlupin YuS, Bronin DI, Beresnev SМ, Bogdanovich NM, Kuzin BL, Smorygo OL, Mikutski VA, Smirnova AL, Korobeinikov MV, Arzhannikov AV, Singh P, Rietveld B, van Berkel F. Planar thin film solid oxide fuel cells for intermediate temperature operation (IT SOFC): Design and performance. In: Fuel Cell Performance. Nova Science Publishers; 2012. pp. 143–210.
Pikalova EYu, Guseva EM, Filonova EA. Electrochem Mater Technol. 2024;2(4):20232025. doi:10.15826/elmattech.2023.2.025
Liu J, Zhao J, Liu Y, Zhu Y, Zhou W, Gu Z, Zhang G, Liu Z. Membranes. 2025;15(7):193. doi:10.3390/membranes15070193
Arratibel Plazaola A, Cruellas Labella A, Liu Y, Badiola Porras N, Pacheco Tanaka DA, Sint Annaland MV, Gallucci F. Processes. 2019;7(3):128. doi:10.3390/pr7030128
Eremeev N, Sadovskaya E, Bespalko Yu, Smal E, Pikalova E, Bulavchenko O, Suprun E, Mikhailenko M, Korobeynikov M, Sadykov V. Chim Tech Acta. 2026;13(4):10130. doi:10.15826/chimtech.10130
Markov AA, Savinskaya OA, Patrakeev MV, Nemudry AP, Leonidov IA, Pavlyukhin YuT, Ishchenko AV, Kozhevnikov VL. J Solid State Electrochem. 2009;182(4):799–806. doi:10.1016/j.jssc.2008.12.026
Ancharova UV, Mikhailenko MA, Tolochko BP, Lyakhov NZ, Korobeinikov MV, Bryazgin AA, Bezuglov VV, Shtarklev EA, Vlasov AYu, Vinokurov ZS. IOP Conf Ser Mater Sci Eng. 2015;81(1):012122. doi:10.1088/1757-899X/81/1/012122
Ancharova UV, Mikhailenko MA, Tolochko BP, Lyakhov NZ, Korobeinikov MV, Bryazgin AA, Vinokurov ZS, Selyutin AG. IOP Conf Ser Mater Sci Eng. 2016;110(1):012110. doi:10.1088/1757-899X/110/1/012110
Savinskaya OA, Nemudry AP, Nadeev AN, Tsybulya SV, Lyakhov NZ. Bull Russ Acad Sci Phys. 2010;74(8):1053–4. doi:10.3103/S1062873810080046
Starkov IA, Kozhemyachenko AS, Bychkov SF, Nemudry AP, Lyakhov NZ. Bull Russ Acad Sci Phys. 2010;74(8):1059–61. doi:10.3103/S106287381008006X
Ancharova UV, Lyakhov NZ, Nemudry AP, Tsybulya SV. Effekty nanostrukturirovaniya v nestekhiometricheskikh kislorod-provodyashchikh perovkitakh [Effects of nanostructuring in nonstoichiometric oxygen-conductive perovskites]. Fazovye perehody, uporâdočennye sostoâniâ i novye materialy [Phase transitions, solid states and new materials]. 2010;3:9–11. Russian.
Podyacheva OYu, Ismagilov ZR, Shmakov AN, Ivanov MG, Nadeev AN, Tsybulya SV, Rogov VA. Catal Today. 2009;147(3–4):270–4. doi:10.1016/j.cattod.2009.01.017
Ivanov MG, Shmakov AN, Drebushchak VA, Podyacheva OYu. J Therm Anal Calorim. 2010;100(1):79–82. doi:10.1007/s10973-009-0008-5
Goldberg E, Nemudry A, Boldyrev V, Schöllhorn R. Solid State Ionics. 1998;110(3–4):223–33. doi:10.1016/S0167-2738(98)00149-0
Goldberg E, Nemudry A, Boldyrev V, Schöllhorn R. Solid State Ionics. 1999;122(1–4):17–22. doi:10.1016/S0167-2738(98)00553-0
Zhogin IL, Nemudry AP, Glyanenko PV, Kamenetsky YuM, Bouwmeester HJM, Ismagilov ZR. Catal Today. 2006;118(1–2):151–7. doi:10.1016/j.cattod.2006.02.088
Yang Z, Qu K, Zhao Y, Wang L, Kovarik L, Sushko PV, Lyu Y, Zhang J, Yu P, Duan C, Du Y. Sci Adv. 2025;11(34):eadx8890. doi:10.1126/sciadv.adx8890
Zhu X, Yang W, Kharton VV. Mixed Conducting Ceramic Membranes. Berlin, Heidelberg: Springer Berlin Heidelberg; 2017. 367 p. doi:10.1007/978-3-662-53534-9
Xu SJ, Thomson WJ. Chem Eng Sci. 1999;54(17):3839–50. doi:10.1016/S0009-2509(99)00015-9
Kozhemyachenko AS, Nemudry AP. Chem Sustain Dev. 2010;18(6):649–55. Available from: https://sibran.ru/en/journals/issue.php?ID=119886&ARTICLE_ID=131057, Accessed on 8 February 2026
Li S, Jin W, Xu N, Shi J. Solid State Ionics. 1999;124(1–2):161–70. doi:10.1016/S0167-2738(99)00136-8
Büchler O, Serra JM, Meulenberg WA, Sebold D, Buchkremer HP. Solid State Ionics. 2007;178(1–2):91–9. doi:10.1016/j.ssi.2006.11.015
Chen C S, Zhang Z P, Jiang G S, Fan, C G, Liu W, Bouwmeester HJM. Chem Mater. 2001;13(9):2797–800. doi:10.1021/cm000809a
Diethelm S, Van Herle J, Middleton PH, Favrat D. J Power Sources. 2003;118(1–2):270–5. doi:10.1016/S0378-7753(03)00098-3
Buckett MI, Strane J, Luzzi DE, Zhang JP, Wessels BW, Marks LD. Ultramicroscopy. 1989;29(1–4):217–27. doi:10.1016/0304-3991(89)90249-0
Jiang N. Micron. 2023;171:103482. doi:10.1016/j.micron.2023.103482
Atas MS. Nucl Instrum Methods Phys Res B Beam Interact Mater At. 2024;548:165252. doi:10.1016/j.nimb.2024.165252
Jiang N. Rep Prog Phys. 2015;79(1):016501. doi:10.1088/0034-4885/79/1/016501
Susi T, Meyer JC, Kotakoski J. Nat Rev Phys. 2019;1:397–405. doi:10.1038/s42254-019-0058-y
Jiang N. Micron. 2016;83:79–92. doi:10.1016/j.micron.2016.02.007
Qin W, Szpunar JA, Umakoshi Y. Acta Mater. 2011;59(5):2221–8. doi:10.1016/j.actamat.2010.12.025
Eremeev N, Bespalko Yu, Sadovskaya E, Krieger T, Cherepanova S, Suprun E, Ishchenko A, Mikhailenko M, Korobeynikov M, Sadykov V. Chim Tech Acta. 2025;12(2):12205. doi:10.15826/chimtech.2025.12.2.05
Sadykov VA, Sadovskaya EM, Bespalko YuN, Smal’ EA, Bulavchenko OA, Eremeev NF, Prosvirin IP, Mikhailenko MA, Korobeynikov MV. Russ J Electrochem. 2025;61(2):28–39. doi:10.1134/S1023193524601670
Mierwaldt D, Roddatis V, Risch M, Scholz J, Geppert J, Abrishami ME, Jooss C. Adv Sustainable Syst. 2017;1(12):1700109. doi:10.1002/adsu.201700109
Huang F T, Xue F, Gao B, Wang LH, Luo X, Cai W, Lu X Z, Rondinelli JM, Chen LQ, Cheong S W. Nat Commun. 2016;7:11602. doi:10.1038/ncomms11602
Bendersky LA, Fawcett ID, Greenblatt M. Chem Mater. 2004;16(25):5304–10.doi:10.1021/cm049927e
Lian J, Wang LM, Sun K, Ewing RC. Microsc Res Tech. 2009;72(3):165–81. doi:10.1002/jemt.20669
Milberg J, Sigl M. Prod Eng Res Devel. 2008;2(2):117–22. doi:10.1007/s11740-008-0088-2
Sigl M, Lutzmann S, Zaeh MF. Transient physical effects in electron beam sintering. In: Proceedings for the 2006 International Solid Freeform Fabrication Symposium; 2006 Aug 14–16; Austin, TX, USA. pp. 464–77. doi:10.26153/tsw/7154
Kahnert M, Lutzmann S, Zaeh MF. Layer formations in electron beam sintering. In: Proceedings for the 2007 International Solid Freeform Fabrication Symposium; 2007 Aug 6–8; Austin, TX, USA. pp. 88–99. doi:10.26153/tsw/7196
Burdovitsin V, Dvilis ES, Zenin A, Klimov A, Oks E, Sokolov V, Kachaev AA, Khasanov OL. Adv Mater Res. 2013;872:150–6. doi:10.4028/www.scientific.net/AMR.872.150
Kim H M, Lee M H, Kim K B, Nanotechnology. 2011;22(27):275303. doi:10.1088/0957-4484/22/27/275303
Kim H M, Park K B, Kim J J, Chae H, Yu J S, Lee K, Kim K B. Nano Converg. 2018;5:32. doi:10.1186/s40580-018-0164-z
Wang YC, Wang DC. Int J Autom Smart Technol. 2014;4(3):157–62. doi:10.5875/ausmt.v4i3.556
Sadykov VA, Sadovskaya EM, Bespalko YuN, Smal’ EA, Eremeev NF, Prosvirin IP, Bulavchenko OA, Mikhailenko MA, Korobeynikov MV. Solid State Ionics. 2024;412:116596. doi:10.1016/j.ssi.2024.116596
Klimov A, Bakeev I, Oks E, Zenin A. Coatings. 2022;12(2):278. doi:10.3390/coatings12020278
Zolotukhin DB, Oks EM, Tyunkov AV, Yushkov YuG. Radiat Phys Chem. 2022;197:110169. doi:10.1016/j.radphyschem.2022.110169
Jiang R, Torresani E, Olevsky EA. J Mater Res Technol. 2025;39:368–91. doi:10.1016/j.jmrt.2025.09.129
Vanmeensel K, Laptev A, Huang SG, Vleugels J, Van der Biest O. The role of the electric current and field during pulsed electric current sintering. In: Ceramics and Composites Processing Methods. Ho
